Computers with liquid refrigeration
- TriGGiT
- Joined: Fri Apr 16, 2004 9:51 pm
- Location: Spain
Computers with liquid refrigeration
I suppose soem of you have this kind of computer, i shouls have posted this under hardware help but here it gets more noticed.
Question is how often do you need to changethe liquid thats inside the box in he computer does this liquid evaporates with time or you can just igonre and not have to change anything.
Have no experience on this field so help is appreciated.!!!
Question is how often do you need to changethe liquid thats inside the box in he computer does this liquid evaporates with time or you can just igonre and not have to change anything.
Have no experience on this field so help is appreciated.!!!
- BasharOfTheAges
- Just zis guy, you know?
- Joined: Tue Sep 14, 2004 11:32 pm
- Status: Breathing
- Location: Merrimack, NH
Re: Computers with liquid refrigeration
I'd suggest asking that at a hardware tech forum since you'd get hundreds of people that know what they're talking about instead of the maybe one or two you'd be lucky to find here.
Also - liquid cooling is no more than a semi-dangerous fad at this point - heat pipes are far more effective, far less dangerous to put in your case, and far cheaper than a liquid cooling solution.
Also - liquid cooling is no more than a semi-dangerous fad at this point - heat pipes are far more effective, far less dangerous to put in your case, and far cheaper than a liquid cooling solution.
Anime Boston Fan Creations Coordinator (2019-2023)
Anime Boston Fan Creations Staff (2016-2018)
Another Anime Convention AMV Contest Coordinator 2008-2016
| | |
Anime Boston Fan Creations Staff (2016-2018)
Another Anime Convention AMV Contest Coordinator 2008-2016
| | |
- milkmandan
- Joined: Sat Jun 04, 2005 12:50 am
- Location: California
- Contact:
Re: Computers with liquid refrigeration
Hey triggit,
I may be able to help as I've been dealing with computer hardware for a while now and as my major i have nothing better to do :\
What type of liquid cooling you are talking about.
When you do water cooling for any type of machine, are you cooling through a radiator or a compressor?
Since you mentioned refrigeration in your topic i am going to assume a compressor as that is the only method that LOWERS temperature below room temp.
For a water cooled system with a compressor you would need to 'add' liquid (just some) every 7-10 months.
As it does evaporate slowly, very slowly. But it does.
However, during initial set up, if you contaminated your liquid too much in any way, by dirt, grim, dust, oils or anything, you will need to flush your entire system if you see mold or crap build up in your tubes. Clean it with IPA and maybe even boiling distilled water.
For the most part you can ignore it, for 10 months and just add additional fluid If #1, you use non-corrosive non-additive fluid. #2, cleaned your components REALLY well before you put everything together.
PM me if you still need more advice.
I personally do not recommend water cooling with a compressor, it really is not worth it, unless you like in a place that is constantly 90+ Degrees F.
I may be able to help as I've been dealing with computer hardware for a while now and as my major i have nothing better to do :\
What type of liquid cooling you are talking about.
When you do water cooling for any type of machine, are you cooling through a radiator or a compressor?
Since you mentioned refrigeration in your topic i am going to assume a compressor as that is the only method that LOWERS temperature below room temp.
For a water cooled system with a compressor you would need to 'add' liquid (just some) every 7-10 months.
As it does evaporate slowly, very slowly. But it does.
However, during initial set up, if you contaminated your liquid too much in any way, by dirt, grim, dust, oils or anything, you will need to flush your entire system if you see mold or crap build up in your tubes. Clean it with IPA and maybe even boiling distilled water.
For the most part you can ignore it, for 10 months and just add additional fluid If #1, you use non-corrosive non-additive fluid. #2, cleaned your components REALLY well before you put everything together.
PM me if you still need more advice.
I personally do not recommend water cooling with a compressor, it really is not worth it, unless you like in a place that is constantly 90+ Degrees F.
- milkmandan
- Joined: Sat Jun 04, 2005 12:50 am
- Location: California
- Contact:
Re: Computers with liquid refrigeration
@BasharOfTheAges: with non conductive liquid, it is 100% safe. Only more expensive than heat pipes, but a FAR superior solution to cooling. Anyone who is OCing or crunching should consider this solution.
- the Black Monarch
- Joined: Tue Jul 09, 2002 1:29 am
- Location: The Stellar Converter on Meklon IV
Re: Computers with liquid refrigeration
The answer to the question is that you never need to change the liquid coolant as long as the loop is sealed.
Ask me about my secret stash of videos that can't be found anywhere anymore.
- Kariudo
- Twilight prince
- Joined: Fri Jul 15, 2005 11:08 pm
- Status: 1924 bots banned and counting!
- Location: Los taquitos unidos
- Contact:
Re: Computers with liquid refrigeration
Wrong again. Microbes can gum up a loop, and coolant will evaporate (and degrade) over timethe Black Monarch wrote:The answer to the question is that you never need to change the liquid coolant as long as the loop is sealed.
- the Black Monarch
- Joined: Tue Jul 09, 2002 1:29 am
- Location: The Stellar Converter on Meklon IV
Re: Computers with liquid refrigeration
Only if you're not using the proper additives. Everclear comes to mind...Microbes can gum up a loop
Ask me about my secret stash of videos that can't be found anywhere anymore.
- milkmandan
- Joined: Sat Jun 04, 2005 12:50 am
- Location: California
- Contact:
Re: Computers with liquid refrigeration
maybe not 'NEVER' but for a long time.the Black Monarch wrote:The answer to the question is that you never need to change the liquid coolant as long as the loop is sealed.
your loop can evap, or if during building you sucked and didn't properly clean your pump, rad, tubes, blocks it can get dirty over time.
but also if you used poor solution, the heat from the blocks can cause separation in the liquid.
=-=
however in my case, i haven't needed to replace liquid, its still clear as day after 9 months, a small small bit has evaped. but not enough yet.